Toshiba e-STUDIO170F Service Manual page 80

2) When the Optional paper tray is installed, the screen below is displayed. Use the [ ] or [ ] keys to
select the desired size of paper (LT, A4), then press the [ENTER] key.
PAPER SIZE (TRAY 2)
1 . LT
2 . A4
LT
Select the Letter size paper.
A4
Select the A4 size paper.
3) After the "COMPLETED" message is displayed, press the [STOP] key to return to the Standby Mode
screen.
[ 4 ] Reset Drum Count [MENU], [5], [2], [04]
This is to reset the Drum unit counter after you replace the Drum unit.
Note:
You must to reset the drum counter when you replace the Drum Unit. Never perform this opera-
tion on any other occasion.
1) Use the [ ] or [ ] keys to select the desired option (YES, NO), then press the [ENTER] key.
RESET DRUM COUNT
2 . NO
1 . YES
YES
Reset the Drum unit counter.
NO
Does not reset the Drum unit counter.
2) When "1.YES" selected. The screen is displayed, then press [ENTER] key.
RESET DRUM COUNT
ARE YOU SURE ?
3) After the "COMPLETED" message is displayed, press the [STOP] key to return to the Standby Mode
screen.
e-STUDIO170F Function Settings
4 - 20
January 2005 © TOSHIBA TEC