Toshiba e-STUDIO170F Service Manual page 392

Hide thumbs Also See for e-STUDIO170F:

Table of Contents

[ 3 ] Example of protocol

The signal shaded below means the most noteworthy one in the procedure.

The receiver cannot detect a CM signal while sending the ANSam signal. Therefore, it sends a DIS sig-

nal to indicate V.8 support. The transmitter sends a CI signal that causes the receiver to send another

ANSam signal, which makes the receiver switch to the V.8 procedure.

e-STUDIO170F Dialing and Communication Procedure

Line is closed.

( DIS cannot be

recognized. )

Show Quick Links

Table of Contents