Toshiba e-STUDIO170F Service Manual page 350

[ 9 ] RX Drive Gear Assembly
Before disassembling or reassembling, be sure to refer to
sembling".
(1) Remove the TX drive assembly. (Refer to
(2) Remove the front cover. (Refer to
(3) Remove the fuser. (Refer to
(4) Remove the feed upper guide. (Refer to
(5) Remove each boss of both right and left sides of the paper guide assembly from the frame.
Remove the paper guide assembly by drawing it out toward you. Remove the two springs.
(6) Remove the RX motor. (Refer to
(7) Remove the FAN motor. (Refer to
(8) Remove the Paper pickup solenoid. (Refer to
e-STUDIO170F Removal/Replacement/Adjustment
P.8-9 "[ 6 ] Front Cover")
P.8-32 "[ 4 ] Fuser")
Paper guide assembly
P.8-35 "[ 5 ] RX Motor")
P.8-36 "[ 6 ] FAN Motor")
P.8-1 "8.1 Before Disassembling or Reas-
P.8-15 "[ 1 ] TX Drive Assembly")
P.8-38 "[ 8 ] Feed Upper Guide")
Spring
Fig.8-60
P.8-37 "[ 7 ] Paper Pickup Solenoid")
8 - 42
January 2005 © TOSHIBA TEC