Toshiba e-STUDIO170F Service Manual page 86

[ 6 ] Send After Scan [MENU], [5], [3], [06]
This feature enables you to determine whether the dialing starts while the machine is scanning the doc-
uments or after the machine has scanned all documents in the Memory Send mode.
Also, if dialing after scanning is selected, you can select to delete or send the scanned pages when the
memory become full during scanning.
1) Use the [ ] or [ ] keys to select the desired option, then press the [ENTER] key.
SEND AFTER SCAN
2 . OFF
1 . ON
ON
To enable Send After Scan function.
OFF
To disable Send After Scan function.
When "ON" selected, the screen below is displayed.
Use the [ ] or [ ] keys to select the desired option, then press the [ENTER] key.
WHEN MEMORY FULL
1 . CANCEL SENDING
2 . SEND SCANNED PAGES
CANCEL SENDING
When the memory full occurred, to delete the pages being scanned.
SEND SCANNED PAGES
When the memory full occurred, to send the pages scanned to memory.
2) After the "COMPLETED" message is displayed, press the [STOP] key to return to the Standby Mode
screen.
e-STUDIO170F Function Settings
4 - 26
January 2005 © TOSHIBA TEC