Service Mode - Toshiba e-STUDIO170F Service Manual

11.1.4

SERVICE MODE

The SERVICE MODE is available for service technicians to conduct tests. Therefore, general users
cannot conduct the tests in this mode. By changing to the service mode, you can conduct the FUNC-
TION TEST, MAINTENANCE, and SERVICE LIST.
Service Mode Operation Overview
These are following two methods to enter the service mode.
Note:
When you enter the service mode using this procedure, the facsimile automatically returns to the
standby mode after each test is completed.
• When the facsimile is in the standby mode:
1) Press the following keys in the order of [MENU], [*], [#], [*] and [*].
2) When you change to the service mode, the following three test items are added following "3.
TEST RESULT LIST" of "9. TEST MODE".
TEST MODE
4 . FUNCTION TEST
5 . MAINTENANCE
6 . SERVICE LIST
• When the facsimile is turned OFF:
1) Turn the power switch ON while holding the dial keys [1] and [3] down.
Remark:
The service mode can be canceled by turning OFF and ON the power switch.
e-STUDIO170F Troubleshooting
Ch.11.1.5
Ch.11.1.6
Ch.11.1.7
11 - 14
January 2005 © TOSHIBA TEC