Toshiba e-STUDIO170F Service Manual page 361

[ 9 ] Optional Tray Sensor
Before disassembling or reassembling, be sure to refer to
sembling".
(1) Remove the optional mechanical block. (Refer to
(2) Disconnect the connector from the optional paper tray sensor.
(3) Release the two hooks of the optional tray sensor, and remove the optional tray sensor.
Optional tray sensor
January 2005 © TOSHIBA TEC
P.8-1 "8.1 Before Disassembling or Reas-
P.8-49 "[ 6 ] Optional Mechanical Block")
Connector
Fig.8-76
e-STUDIO170F Removal/Replacement/Adjustment
8 - 53
8