Toshiba e-STUDIO170F Service Manual page 444

[ 7 ] DOC. TRANSMISSION [MENU], [9], [5], [07]
This function is used to send the contents stored in the PIX memory to the designated remote address
when some printer problem disables printing of the received document.
1) Use the [ ] or [ ] key to select the "07.DOC. TRANSMISSION", and then press the [ENTER] key.
DOC. TRANSMISSION
ENTER TEL NUMBER
2) Enter on the dial keys the number of the destination to which you want to send the memory con-
tents, and then press the [ENTER] key.
Remark:
You can also dial the destination by abbreviated dialing, alphabet dialing or one touch key dial-
ing.
3) The transfer is started, and then the display returns to the standby mode screen.
Note:
All of the memory contents will be sent to the designated number. This function does not allow
you to select which memory contents to be remotely printed.
e-STUDIO170F Troubleshooting
11 - 32
January 2005 © TOSHIBA TEC