Toshiba e-STUDIO170F Service Manual page 380

RR Receive Ready
Informs that the facsimile is in the receivable status and demands the data to be specified the received
mode. (EC mode)
RNR Receive Not Ready
Informs that the facsimile is not in the receivable status. (EC mode)
PPR Partial Page Request
Informs that the ECM block (partial page) has not been received correctly. The frame number required
a correction is informed by the FIF. (EC mode)
PPS Partial Page Signal
Informs that the ECM block (partial page) or one page has been transmitted. (EC mode)
CTC Continue to Correct
Replies for the 4th PPR which demands to correct the picture signal; informs that the transmitting sta-
tion will continue to correct the frame data. (EC mode)
CTR Response for Continue to Correct
Replies for CTC and informs that the receiving station has received and consented to the CTC. (EC
mode)
EOR End of Retransmission
Informs that the transmitting station has completed the correction of the error frame data (binary sig-
nal) of previous ECM block. (EC mode)
ERR Response for End Retransmission
Replies for EOR and demands to transmit the picture signal of next ECM block. (EC mode)
RTP Retrain Positive
Informs that the message has been received completely and that the message can be continued after
receiving the synchronization signal and CFR signal.
SUB Sub-address
Indicates that the FIF information is a sub-address in the domain on the call-in side.
SEP Select Polling
Indicates that the FIF information is a sub-address for polling mode.
PWD Password
Indicates that the FIF information is a sub-address for polling mode in a reception.
Indicates that the FIF information is a password for transmission in a transmission.
e-STUDIO170F Dialing and Communication Procedure
9 - 8
January 2005 © TOSHIBA TEC