Toshiba e-STUDIO170F Service Manual page 69

[ 5 ] Power Save [MENU], [5], [1], [02]
This setting allows you to minimize power consumption by turning power off to portions of the machine
(as selected). If the Power Saver function is ON, a warm up period is needed before printing occurs.
This facsimile has two Power Saver modes: Super Energy Saver and Printer Power Saver.
Super Energy Saver turns virtually all power off to minimize power consumption. Select one of three
modes, Automatic, Manual or OFF.
Printer Power Saver turns only the fuser section off during the time period selected.
1) Use the [ ] or [ ] keys to select the desired option (SUPER E.S. or PRINTER P.S.), then press the
[ENTER] key.
POWER SAVER
01 . SUPER E.S.
02 . PRINTER P.S.
SUPER E.S.
To select the SUPER ENERGY SAVER mode.
PRINTER P.S.
To select the PRINTER POWER SAVER mode.
When SUPER E.S. is selected:
The screen below is displayed.
- Use the [ ] or [ ] keys to select one of the three options (AUTO, MANUAL or OFF), then press
the [ENTER].
SUPER E.S.
2 . MANUAL
3 . OFF
1 . AUTO
AUTO
To select the Automatic Super Energy Saver mode.
MANUAL
To select the Manual Super Energy Saver mode. When this mode is selected, the operator
selects/deselects Super Power Saver by way of a key on the operator Operation Panel.
OFF
To deactivate the Super Energy Saver mode.
When Automatic is selected, the screen below is displayed. Enter the desired TIME period (in
minutes) and press the [ENTER] key.
ENTER TIME
(1-60)
Set the time period from 1 (minute) to 60 (minutes) for standby operation prior to entering the
Super Energy Saver mode.
January 2005 © TOSHIBA TEC
[ 3]
4 - 9
e-STUDIO170F Function Settings
4