Toshiba e-STUDIO170F Service Manual page 441

[ 4 ] SET CONT. LEVEL [MENU], [9], [5], [04]
This setting adjusts the normal and halftone scanning contrast (slice level) to one of five levels.
1) Use the [ ] or [ ] key to select the "04.SET CONT. LEVEL", and then press the [ENTER] key.
SET CONT. LEVEL
1 . NORMAL MODE
2 . GRAY MODE
NORMAL MODE
Adjusts the slice level for normal scanning.
GRAY MODE
Adjust the slice level for halftone scanning.
2) Use the [ ] or [ ] key to select the desired mode, and then press the [ENTER] key.
3) Enter the desired contrast level, using the [1] to [5] keys on the dial keypad, and then press the
[ENTER] key.
CONTRAST LEVEL
(1-5)
4) After setting, the display returns to the standby mode screen.
January 2005 © TOSHIBA TEC
[3] 1 (Light) to 5 (Dark)
11 - 29
e-STUDIO170F Troubleshooting
11