Checking The Frame; Checking The Swingarm; Checking The Throttle Cable Routing - KTM 250 EXC-F SIX DAYS EU Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.41

Checking the frame

12.42

Checking the swingarm

12.43

Checking the throttle cable routing

–
Check the chain guide for wear.
Info
Wear is visible on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
401760-01
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the chain guide.
Guideline
Remaining screws, chassis
Remaining nuts, chassis
B01537-01
Finishing work
–
Remove the motorcycle from the lift stand. (
x
–
Check the frame for cracking and deformation.
» If the frame exhibits cracking or deformation due to a mechanical impact:
–
Change the frame.
401340-01
x
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401341-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
x
x
Info
A frame that has been damaged due to a mechanical impact must
always be changed. Repair of the frame is not authorized by KTM.
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 67)
( p. 71)
x
M6 10 Nm
(7.4 lbf ft)
M6 10 Nm
(7.4 lbf ft)
p. 56)
77