Service Work On The Chassis 13; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand - KTM Freeride E-XC 2019 Owner's Manual

13.1

Raising the motorcycle with a lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the protection cap. (
Main work
–
Use the motor guard underneath the motor to raise the vehicle.
Lift stand (78129955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
Main work
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up
and secured with the rubber strap.
401943-10
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (

SERVICE WORK ON THE CHASSIS 13

p. 43)
p. 69)
p. 107)
p. 71)
1
p. 108)
p. 69)
to the ground
57