Muratec MFX-2830 Operation Manual page 460

Hide thumbs Also See for MFX-2830:
Table of Contents

Advertisement

In This
Case...
Symptom
The paper comes out solid
black.
The paper comes out blank.
There are blank spots
PRINTER
PRINTER
The paper comes out wrinkled
or with the letters blurry
There are blanks in the direc-
tion the paper is fed
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
5-40
In This Case...
Maintenance and Troubleshooting
Cause
The drum cartridge is worn out or
broken.
The machine might malfunction.
Several sheets of paper were fed
through at the same time.
The drum cartridge has run out of
toner.
The drum cartridge is worn out or
broken.
The machine has malfunctioned.
Is the document facing the right
side?
The paper is damp.
You are using the wrong type of pa-
per.
The document glass is dirty.
You are using the wrong type of pa-
per.
The paper is damp.
The drum cartridge is not set prop-
erly.
The drum cartridge is worn out or
broken.
The ADF glass is dirty.
Countermeasure
Replace with a new drum cartridge.
Contact your Muratec dealer.
Flutter the pages before setting pa-
per.
Replace with a new drum cartridge.
Replace with a new drum cartridge.
Contact your Muratec dealer.
Set the document correctly.
Replace with a new paper.
Use the right type of paper.
Clean the document glass.
Use the right type of paper.
Replace with a new paper.
Set the drum cartridge properly.
Replace with a new drum cartridge.
Clean the ADF glass.
Reference page
5-17
1-29
5-17
5-17
1-42
1-29
1-26
5-20
1-26
1-29
5-17
5-17
5-20

Advertisement

Table of Contents
loading

Table of Contents