Copy Reservation - Muratec MFX-2830 Operation Manual

Note
When the document is
scanned using the ADF,
copying will begin auto-
matically.
In this case
●To have the next document scanned, press "Next Doc" while the document is being scanned.
●The ADF's default setting is set to "Complete". To scan the next document, select "Next Doc" while the current docu-
ment is being scanned. For the document glass, the default setting is "Next Doc".
●Setting to "Complete" during scanning will begin copying of the scanned documents.

Copy reservation

A different document can be loaded and reserved for copying even while another copy is being printed.
When the printing copy is completed, the copying of the next job will begin, meaning no wasted downtime!
Reference
Document type/contrast
setting (see page 2-4)
Reference
The copy queue can be
checked. (see page 2-26)
7
When the document is scanned
using the document glass, press
[Complete] to begin copying.
1
"Copy Reserve Ready" is dis-
played while the copy is printing.
2
Load the document you want to
reserve.
3
Set the document type and con-
trast as well as the functions as
necessary.
4
Press .
START
5
Press [Yes] to perform Copy res-
ervation.
Scanning of the document will
begin, and copying will start as
soon as the current copy job is
completed.
How to Perform Basic Copy
Set next document.
Set next doc.
Memory
Doc.Type
Auto
Contrast
Auto
Zoom
Auto
LTR
LTR
Next Doc Complete
LGL
11x17
Copy Reserve Ready
Scan Pages 12 PrintPages 12 Copie 1/ 1
Memory
Doc.Type
Auto
Contrast
Auto
DuplexCopy
OFF
LTR
Zoom
100%
LTR
Finishing
LGL
No Sort
11x17
Others
Copy Reserve Ready
Complete
Scan Pages 3 PrintPages 3 Copie 1/ 1
Doc.Type
Auto
Contrast
Auto
This will reserve the job, proceed?
DuplexCopy
OFF
LTR
Zoom
Yes No
100%
LTR
Finishing
LGL
No Sort
11x17
Others
COPY Chapter1 Basic Copy Features
●
94%
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
Set 001
FAX
23% Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Set
001
Appendix
2-13