Receiving Faxes; Auto Receiving Mainly For Fax (Fax Ready Mode) - Muratec MFX-2830 Operation Manual

FAX
Chapter1

Auto receiving mainly for fax (Fax ready mode)

Operating tips
●Use the Reception Mode at the User Install setting to set the machine to Fax Ready Mode. (see page
1-54)
●The handset is an optional component. (see page 1-13)
●The machine can be set to ring even if a handset is not installed. (see page 4-35)
Note
You can pick up the hand-
set while the machine
is ringing to talk on the
phone.
Reference
· To make the machine
ring, you need to make
t h e s e t t i n g s f o r t h e
handset or the fax ring-
er on the machine. (see
page 4-35)
· The number of rings can
be changed from 1 to 10.
(see page 3-196)
In this case
To change the number of rings...
The number of rings can be set from 1 to 10. You can make it easier to answer the phone by increasing the number of
rings to extend the time until the fax answers the phone. For the details of setting method, refer to page 3-196.
3-40
FAX Chapter1 Basic Fax Features
●

Receiving Faxes

1
Your machine rings.
2
Fax reception will begin.