Muratec MFX-2830 Operation Manual page 415

Function
Copy Protect Prohibits copies.
When turned ON, the display will not switch to the copy screen even if
is pressed.
COPY
Fax & copy mode will not be possible.
Department You can limit who uses the machine for sending faxes and making cop-
Management ies by requiring input of a department code.
Cost Management You can register the charge data for collecting copying and faxing
charges per department.
Security This stores and does not print documents received after security recep-
Reception tion starting time.
This function makes it possible to store in memory faxes received at
night, for example, when no one is in the office. The received faxes can
be printed later.
Jobs Waiting to The number of out-of-paper receptions and copies waiting to be printed
Print is displayed.
Print Mask This adjusts the size of the margin around the paper.
PIN Mode When turned ON if required to enter the PIN (personal identification
number) for making a long distance call, the PIN will not appear in a
journal, error message printout or a transmit confirmation report.
Note
Underlined items are the factory default.
Description
Common Settings for Copy and Fax
Device Management Settings
Setting
ON
OFF
See "Managing Operating
Conditions by Depart-
ment". (see page 4-12)
Refer to "Managing Op-
erating Conditions by De-
partment" on page 4-12.
Refer to "Preventing Re-
ceived Documents from
Being Read by Others
(Security Reception)" on
page 3-88.
Refer to "Checking Copy
Print Queue" on page
2-26.
Refer to "Checking the
out-of-paper reception
copy print queue"on page
3-49.
0.04 to 0.16 inches: 0.12
inch
Refer to "Masking the
PIN" on page 3-142.
Function Settings
●
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
4-37