Unacceptable Paper - Muratec MFX-2830 Operation Manual

■ Duplex printing
Paper size-Paper type
Regular size paper (plain paper only)
11 ×17 , Legal, Letter, Letter
" "
■ How to store paper
Acceptable paper, if improperly stored, could cause frequent paper jams, reduced print quality and cause equip-
ment malfunction. Store the paper in a location that meets the following conditions.
· Store in a place with low humidity.
· After opening the wrapping, wrap the unused paper in the same wrapper and store it in the cabinet or a loca-
tion with low humidity.
· Store the paper in a flat location - do not stand it on end.
· Avoid wrinkles, folding, curling, etc.
· Store in a place out of direct sunlight.

Unacceptable paper

Do not use the following papers. Using them could cause poor printing quality, paper jams, or equipment mal-
function.
·OHP film that has already been printed on once
*Even OHP film that was output without printing on it cannot be reused.
· Paper printed on by a thermal printer or an inkjet printer
· Paper that is too thick or too thin
· Paper that is creased, folded, wrinkled, or torn
· Paper for which the wrapping has been open for an extended period of time
· Paper that has absorbed moisture
· Paper with holes for binders or paper with perforated lines
· Paper with surfaces that are too smooth, too rough, or not uniform
· Paper with processed surfaces, such as carbon paper, thermal paper, or pressure sensitive paper
· Paper subject to processing such as gilding or embossing
· Paper of different sizes mixed together
· Irregularly shaped paper (paper that is not rectangular)
· Paper that is fastened by glue, staples, paper clips, etc.
· Paper with labels stuck to it
· Paper with ribbons, hooks, buttons, etc. attached to it
· Paper that is curled or waved
· Art paper, coated paper, coated paper for inkjet printers
Loading Paper
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
1-27
Getting Started