Main Unit Part Names And Functions - Muratec MFX-2830 Operation Manual

Getting
Started

Main unit part names and functions

■ Main unit
12
No.
1 Right Cover
2 Right Cover Release Lever (C1)
3 Right Lower Cover
4 Bypass Tray
5 Extension Tray
6 Paper Loading Guide
7 Slide Plate
8 Slide Plate Knob
9 Right Lower Cover Release
Lever
10 Paper Level Indication Window
11 Front Cover
12 Control Panel
13 ADF Cover
14 ADF Cover Release Lever (A1)
15 Document Guide
16 Document Tray
17 Document Output Tray
18 Document Output Extension Tray This is extended when catching long document.
19 USB Port
1-14
Getting Started
14
11
10
Name
This is opened to remove jammed paper or to change the drum cartridge.
Pull up on this to open the right cover.
This is opened to remove jammed paper.
This is used to copy or print special or custom paper, such as postcards and
envelopes. (see page 1-26)
This is extended when loading large-size paper.
This is adjusted to match the width of the paper to prevent skewing.
This is pulled when the paper in the bypass tray jams.
(C3) This controls the movement of the slide plate.
Pull up on this to open the right lower cover.
(C2)
The red shown in this area increases as the level of the paper in the paper
tray decreases.
(B) This is opened to replace the toner bottle. (see page 5-15)
This is where the keys and touch screen required for operation are grouped.
This is opened when a document jams or to when cleaning the scan area.
Pull up on this to open the document cover.
This supports the document so that it feeds straight.
This holds the document in the ADF.
This catches originals after they have been scanned.
The machine can be used as a printer by connecting it to a computer via a
USB cable.
13
15
7
8
9
Function
16
17
18
19
1
2
3
4
5
6