Troubleshooting; Unit Does Not Operate - Muratec MFX-2830 Operation Manual

In This
Case...
Read this if you find trouble with the machine. Contact your Muratec dealer if the following
steps do not solve the problem.

Unit does not operate

Status
Unit does not
operate
Nothing appears
in the display
Unable to dial
T h e p h o n e d o e s
not work
The paper does not
come out
Paper often jams
The document does
not come out
D o c u m e n t o f t e n
jams
5-36
In This Case... Maintenance and Troubleshooting
●

Troubleshooting

Check item
Is the power cord firmly inserted?
Is the power switch on?
Is the touch screen contrast for the
display set too light or too dark?
Is the lamp on
ENERGY SAVE
Is the phone line connected to both
the unit and the wall outlet?
Is the type of phone line set cor-
rectly?
Is the machine in the middle of
transmitting a document?
Is the type of phone line set cor-
rectly?
Is paper jammed?
Is paper loaded properly?
Is the cassette loaded properly?
Is the document jammed?
Are you using the right type of doc-
uments?
Is the document guide aligned prop-
erly?
Are there pieces of paper left in the
ADF?
Is the document feeder dirty?
Countermeasure
Check the power switch and power plug.
Turn the power switch on.
Adjust the touch screen contrast while watch-
ing the display.
on? The machine is in Energy Save Mode. Press
, and turn Energy Save Mode off.
ERGY SAVE
Make sure the line is connected correctly.
Make sure all settings match the phone line
properties.
Wait until the machine finishes transmitting.
Make sure all settings match the phone line
properties.
Check the error message and remove the
jammed paper.
Load paper properly.
Make sure the cassette is pushed all the way
in.
Remove the jammed document and reload it.
Use the right type of documents.
Align the document guide along the document.
Open the ADF cover and check.
Clean the document feeder roller.
Reference page
1-16
1-24
1-19
1-25
EN-
1-16
1-53
1-53
5-2
1-29
5-12
1-40
1-42
5-12
5-23