Muratec MFX-2830 Operation Manual page 122

COPY
Chapter2
2-42
COPY Chapter2
●
■ Setting the image layout
When the copied images are smaller in the manual magnification setting than in the
automatic setting, you can select the layout for copying onto the paper as follows:
·Mode 1 (Equivalent layout):
The images of repeat copies are laid
out evenly on the paper.
5
(1) To set the layout, press [Lay-
out].
(2) Select the layout.
(3) Press [Enter] to set the lay-
out position.
Advanced Copy Features
·Mode 2 (Continuous layout):
The images of repeat copies are laid
out using the edge of the paper as
the standard.
Repeat
Adjust settings and select Enter.
To go back, select [Repeat].
Repeat Paper Ratio
x4 Letter
Doc. Direction
Repeat
Select the page layout and select [Enter].
Repeat Paper Ratio
Layout
x4 Letter
Doc. Direction
Mode 1 Mode 2
Repeat
Adjust settings and select Enter.
To go back, select [Repeat].
Repeat Paper Ratio
x4 Letter
Doc. Direction
Enter
Auto
Layout
Mode 1
Line
Yes
Enter
Cancel Enter
Auto
Layout
Mode 1
Line
Yes
Enter
Auto
Layout
Mode 2
Line
Yes