Muratec MFX-2830 Operation Manual page 436

In This
Case...
Note
· The toner inside the
toner bottle may solidify
sometimes, so it must be
always broken up before
use.
· Tapping the bottle too
hard may cause damage
to the table.
5-16
In This Case... Maintenance and Troubleshooting
●
5
Tap the new toner bottle on a
table or other hard surface four
or five times for each direction.
6
Vigorously shake the new toner
bottle up and down five times.
7
With the seal on the toner bottle
facing up, set it in the toner hop-
per.
8
Tilt it down until the toner
holder locks. Grab the seal on the
toner bottle and slowly pull it out
towards you.
Seal
Toner hopper
Seal
Toner
holder