Device Management Setting List - Muratec MFX-2830 Operation Manual

Device management setting list

Function
Soft Key This function allows you to change the "soft keys" displayed in the
standby screen.
Auto Reset Time This sets the period of time before the copy/fax screen returns to the
standby screen.
■Copy and Scanner screens
"Reset time"
"Reset After Scan":
■Fax screen
When the machine does not operate for a set period of time after fax-
ing, the selected settings are reset (returned to their original values).
The reset time can be set.
Sound Settings This allows you to set the various sounds.
■Buzzer and Key Touch Volume
You can adjust the volume of the various sounds emitted by the ma-
chine.
■Key Touch Tone
You can change the tone emitted when pressing the buttons.
Different tones can be set for fax and copy.
■Fax Ringer Volume
You can set the ringer for fax reception even if the optional handset
is not used.
■Complete beep
Sound a beep to signal that a copy or a fax is completed.
●Copy Completion Beep............ When copying has finished
●Fax Transmission Complete ... When a fax has been sent
●Fax Reception Complete ......... When a fax has been received
●Fax Printing Complete............ When printing a received document
●Sleep Mode Reception ............. When reception has finished during
Note
· Press [Test] to hear the selected sounds.
· There is no completion guidance when fax reception finishes in sleep mode.
· "Sleep Mode Reception" is the completion reception beep in can be set when
energy save period is set. (See "Energy Save Period" page 4-36.)
■Paper Jam Alarm
Sound an alarm tone when a paper jam occurs.
■Document Left on glass Alarm
Sound an alarm tone when a document is left on the glass after scanning.
Description
:When the machine does not operate for a
set period of time after copying or scanning
is completed, the selected settings are reset
(returned to their original values). The reset
time can be set.
:Turning it ON resets the resolution, resiz-
ing, and other settings after the document
is scanned.Turning it OFF resets the values
after the selected reset time has elapsed.
has finished
energy save mode
Device Management Settings
Setting
Refer to "Changing Soft
Keys" on page 4-10.
●Reset time
1 to 10 minutes:
3 minutes
●Reset After Scan:
ON
OFF
●Reset time
1 to 10 minutes:
3 minutes
OFF
Low
Middle
High
●Fax
High Mid Low
●Copy
High Mid Low
●Scanner
High Mid Low
OFF
ON
OFF
Type 1
Type 2
Type 3
Voice
OFF
Type 1
Type 2
Type 3
ON
OFF
ON
OFF
Common Settings for Copy and Fax
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
4-35
Function Settings
●