Auto Receiving With Priority Given To The Phone (Tel/Fax Ready Mode) - Muratec MFX-2830 Operation Manual

FAX
Chapter1
Note
· When you hear fax tones
("beep-beep-beep"), it
is a fax call coming in.
When you answer the
call using the handset,
press .
START
· When you answer the
call using an addition-
ally connected phone,
p r e s s t h e m a c h i n e 's
on the control
START
panel to begin reception.
(Hang up the handset
after reception.)

Auto receiving with priority given to the phone (Tel/Fax ready mode)

Operating tips
●Use the Reception Mode at the User Install setting to set the machine to "Tel/Fax Ready Mode". (see
page 1-54)
●When you have a phone call and the number of rings exceeds two times, the fax will be in the reception
mode. Therefore the phone call is charged to the caller even if you are not in.
●The optional handset is required to answer phone calls. (see page 1-13)
Reference
· To make the machine
ring, you need to make
t h e s e t t i n g s f o r t h e
handset or the fax ring-
er on the machine. (see
page 4-35)
· The number of rings can
be changed from 1 to 10.
(see page 3-196)
3-42
FAX Chapter1 Basic Fax Features
●
2
Answer the call.
■ Receiving faxes
1
Your machine rings.
2
Fax reception will begin.