Muratec MFX-2830 Operation Manual page 309

Reference
Methods for specifying
the location are as fol-
lows:
· Specify using the nu-
meric keypad (see page
3-8)
· Specify using the one-
touch keys (see page
3-10)
· Specify using speed-dial
(see page 3-10)
· Specify using the Ad-
dress Book (see page
3-12)
· When specifying multi-
ple locations, use Broad-
cast Tx (see page 3-58)
or Group Tx. (see page
3-61)
· Set the resolution and
contrast as necessary.
(see page 3-4)
Reference
For details of canceling
the transmission, refer to
page 3-28.
4
(1) Select the method for the doc-
ument to be sent.
(2) Press [Enter].
5
Duplex scanning is now set.
Press [Enter] again.
6
Specify the location.
If the location was set using the
one-touch keys or the Address
Book, the duplex document will
be scanned and transmission
started.
If location were specified using
the numeric keypad, speed-dials
or broadcast, proceed to step 7.
7
Press .
START
The document will be scanned
and sent.
Scanning and Sending Duplex Documents
Fax Functions
Select the bound originals binding
position and select [Enter].
Bind Position
F-Code Tx
OFF
OFF
DuplexScan
OFF
Fax Ready
Press [Location] to check/delete a location
Sep 24 2004 01:30pm
Resolution
Normal
Contrast
Normal
Broadcast
ON
Monitor
Tx Report
OFF
Others
FAX Chapter2
2/2
Enter
Cancel Enter
OverseasTx Memory Tx Dialing
Right&Left Top
OFF ON Options
Auto Rx
ON
Fax Ready Mode
Memory 99%
Index Location 1/2
Atlanta New York Los Angels
Office Office Office
Chicago Houston Seattle
Office Office Office
London Paris Hong Kong
Office Office Office
Tokyo Domestic Overseas
Office Sales Dep Sales Dep
Numeric
All AB
List
Advanced Fax Features
●
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-131