Laminator - DataCard SD260 Installation And Administration Manual

Using custom magnetic stripe data formats is a two‐step process. First, define the
custom tracks using MagStripeCustomTrack1, MagStripeCustomTrack2, and
MagStripeCustomTrack3. Second, apply the custom track using the settings on
the MagStripeGeneral menu.
1.
To use the defined custom track:
A.
B.
2.
Click Set Current to apply the changes.

Laminator

The Laminator settings let you specify values when using a laminating system.
Description
1) DebowDelay
2) ExceptionCardDebow
Direction
3) ExceptionCardDebow
DistanceDown
4) ExceptionCardDebow
DistanceUp
5) ExceptionCardDebow
DwellMs
6) ExceptionCardImpress
Depth
7) ExceptionCardImpress
Dwelltime
8) ExceptionCardImpress
PositionOffset1
56
Open the MagStripeGeneral menu.
Select Custom for DataFormat1, DataFormat2, or DataFormat3 to use the
custom track.
MagStripeCustomT rack1 corresponds to DataFormat1
•
MagStripeCustomTrack2 corresponds to DataFormat2
•
MagStripeCustomTrack3 corresponds to DataFormat3
•
Current Value
Default Value (unit)
1000 1000
Down Down
15 15
105 105
1000 1000
0 0
2000 2000
2000 2000
Allowed
Range
[0 – 1500]
[0 – 150]
[0 – 150]
[0 – 5000]
[-200 – 200]
[0 – 10000]
[0 – 4000]
Printer Manager