Date And Time; Schedule - Barco G62 User Manual

User controls – Settings menu

11.1 Date and time

About date and time
Set up the date and time for the projector.
Clock mode
Set the clock mode to use an NTP server (network-based) or a manual setting.
If the clock mode is set to NTP Server, make sure the projector has access to the Internet.
Date
Set a date for the projector.
The date format is in Year/Month/Date.
Time
Set the time for the projector.
Daylight Saving Time
Configure the daylight saving settings if required.
NTP Server
Select an NTP Server for the network clock mode.
Time Zone
Set a time zone for the network clock mode.
Update Interval
Set the date and time update interval.
Apply
Apply date and time modifications.

11.2 Schedule

About schedule
Schedule the project functions to operate automatically at the set time.
68 R5914653 /10 G62