Select The Vlan Type; Q Static Vlan; Vlan Status - ZyXEL Communications XS3700 Series User Manual

Figure 43 Port VLAN Trunking

7.2.4 Select the VLAN Type

Select a VLAN type in the Basic Setting > Switch Setup screen.
Figure 44 Switch Setup: Select VLAN Type

7.2.5 802.1Q Static VLAN

Make sure 802.1Q is selected in the Basic Setting > Switch Setup screen.
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.

7.3 VLAN Status

See Section 7.2 on page 80
VLAN from the navigation panel to display the VLAN Status screen as shown next.
Chapter 7 VLAN
for more information on 802.1Q VLAN. Click Advanced Application >
XS3700 Series User's Guide
83