Ipv6 Neighbor Discovery Setup - ZyXEL Communications xg3700 series User Manual

Table 29 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup (continued)
LABEL
Index
Interface
IPv6 Global Address/
Prefix Length
EUI-64
Delete
Cancel

6.9.7 IPv6 Neighbor Discovery Setup

Use this screen to configure neighbor discovery settings for each interface. Click the link next to
IPv6 Neighbor Discovery Setup in the IPv6 Configuration screen to display the screen as
shown next.
Figure 50 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup
The following table describes the labels in this screen.
Table 30 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup
LABEL
Interface
DAD Attempts
NS Interval
Reachable Time
Chapter 6 Basic Setting
DESCRIPTION
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This field displays the IPv6 global address and prefix length for the interface.
This shows whether the interface ID of the global address is generated using the EUI-
64 format.
Select an entry's check box to select a specific entry. Otherwise, select the check box
in the table heading row to select all entries.
Check the entry(ies) that you want to remove and then click Delete to remove the
selected entry(ies) from the summary table.
Click Cancel to clear the check boxes.
DESCRIPTION
Select the IPv6 interface you want to configure.
The Switch uses Duplicate Address Detection (DAD) with neighbor solicitation and
advertisement messages to check whether an IPv6 address is already in use before
assigning it to an interface, such as the link-local address it creates through stateless
address autoconfiguration.
Specify the number of consecutive neighbor solicitations (from 0 to 600) the Switch
sends for this interface. Enter 0 to turn off DAD.
Specify the time interval (from 1000 to 3600000 milliseconds) at which neighbor
solicitations are re-sent for this interface.
Specify how long (from 1000 to 3600000 milliseconds) a neighbor is considered
reachable for this interface.
GS3700/XGS3700 Series User's Guide
87