General Mvr Configuration - ZyXEL Communications VES1724-56 User Manual

in the same subscriber VLAN, the receiving port will still be on the list of forwarding destination for
the multicast traffic. Otherwise, the Switch removes the receiver port from the forwarding table.
Figure 130 MVR Multicast Television Example
VLAN 1
A

24.7 General MVR Configuration

Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for
each multicast VLAN. Click Advanced Application > Multicast > Multicast Setting > MVR link
to display the screen as shown next.
Note: You can create up to three multicast VLANs and up to 256 multicast rules on the
Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 131 Advanced Application > Multicast > Multicast Setting > MVR
VES1724-56 User's Guide
Multicast VLAN
S
Chapter 24 Multicast
227