11.1 Overview
This section provides information for Link Aggregation in Monitor.
Link aggregation (trunking) is the grouping of physical ports into one logical higher-capacity link.
You may want to trunk ports if for example, it is cheaper to use multiple lower-speed links than to
under-utilize a high-speed, but more costly, single-port link. However, the more ports you
aggregate then the fewer available ports you have. A trunk group is one logical link containing
multiple ports.
The Switch supports both static and dynamic link aggregation.
Note: In a properly planned network, it is recommended to implement static link
aggregation only. This ensures increased network stability and control over the
trunk groups on your Switch.
11.1.1 What You Can Do in this Chapter
• The Link Aggregation screen
11.2 Link Aggregation
Use the Link Aggregation screens to view Switch link aggregation status. Click Monitor > Link
Aggregation > LAG to access this screen.
Figure 65 Monitor > Link Aggregation > LAG
C
HAPTER
Monitor: Link Aggregation
(Section 11.2 on page
GS1900 Series User's Guide
70
70) displays link aggregation status.
11