Basic Copy Jobs - Default
Basic Copy Jobs - Default
Do a default copy job
Introduction
When you want to copy an original and you do not make any settings, the default presets are
used. You only use the Smart Access to submit your job.
You can see the presets that are used in the job settings section of your job.
Procedure
1.
Feed the original face up and centered on the original feeding table.
The copy tile with the copy Smart Access is automatically selected on the user panel.
2.
Select the number of copies and tap the green button.
NOTE
Tap on [Release the original] under the Smart Access to release your original from the scanner.
236
Chapter 4 - Use the Printing System