The Settings Concept - Canon Oce Colr Wave 500 Operation Manual

The settings concept

Introduction
The multi-touch user panel offers the possibility to make settings for your job locally. There are
two levels when you want to change settings on the user panel:
• Presets: a combination of settings that are used often. It takes only a few steps to make new
settings. Presets give you easy access to change the most commonly used settings.
• Advanced settings: all settings. It takes more steps to make new settings. With the advanced
settings you can fine-tune each setting individually.
The home screen
• When you tap the copy or scan tile on the multi-touch user panel, a new window with presets
opens.
• When you tap the print tile and tap the settings of a listed job, a new window with the print
presets opens.
Presets
The copy, scan, and print menus, each have their own categories of presets.
• [Media], [Layout], [Image], and [Finishing] are the categories for copy and print.
• [File] and [Original] are the categories for scan.
• Per preset category, the default setting is visible in the preset tile. When you tap the tile, a
short list with the other presets is shown.
Advanced settings
In the same window, under the list of presets, a line with [Show all settings] is displayed.
• When you tap on [Show all settings] a list of tiles with all the available job settings opens.
• When you tap a tile, you can change and edit your settings.
Chapter 2 - Get to Know the Printing System
The settings concept
49