Canon Oce Colr Wave 500 Operation Manual page 39

Switch from online mode to manual mode
1 Press the [Enter] button once
2 Press [arrow up] until you see the "hand" sym-
bol. Then press the [Enter] button.
3 The display shows an icon of a folded package.
The number below this icon indicates the
width of the folded package. The number left
of the icon indicates the folding program num-
ber.
If the folding program number is "G" and the
width of the folded package is "0", please press
[arrow up] to select a valid folding program
number (1 to 8).
Switch from manual mode to online mode
Repeat the same procedure as explained above, but now make sure that the 'ONL' is displayed.
Switch the folding device to manual operation and back
Operator interface
Chapter 2 - Get to Know the Printing System 39