Do A Default Print Job - Canon Oce Colr Wave 500 Operation Manual

Do a default print job

Introduction
When you want to print a job and you do not make any settings, the default presets are used. You
only use the Smart Access to start your job.
You can see the presets that are used in the job settings section of your job.
Before you begin
Make sure you submit a job via one of the job submitter applications:
Océ Publisher Express
Océ Publisher Select
Océ Wide format Printer
Driver for Microsoft
®
dows
Océ Postscript Driver
Océ Publisher Mobile
Océ Mobile WebTools
Or submit a job via
LPR
FTP
The cloud (WebDAV)
PlanWell Collaborate
USB
NOTE
This following procedure applies when you have not made settings to enable direct print. With
direct print, the job will be printed immediately. For more information, see
page 227.
Procedure
1.
After you have submitted a job to the printer, tap the print tile on the user panel to open the list of
locations.
2. Select the location of your job. Default, the public Smart Inbox.
Use Océ Publisher Express to send a print job on page 210
Use Océ Publisher Select to send a print job on page 213
Use the Océ Wide format Printer Driver for Microsoft® Windows®
to send a print job on page 215
®
Win-
Use the Océ PostScript® 3 Driver to send a print job on page 217
Use Océ Publisher Mobile to send a print job on page 218
Print from your mobile device on page 220
Use LPR to send a print job on page 222
Use FTP to send a print job on page 221
Use the cloud to send a print job on page 223
Use the cloud to send a print job on page 223
Print from a USB key on page 228
Chapter 2 - Get to Know the Printing System
Do a default print job
Direct print on
59