Advanced Settings For Scan Jobs - Canon Oce Colr Wave 500 Operation Manual

Advanced settings for scan jobs

Introduction
When you tap the scan tile on the multi-touch user panel, you can make your own settings.
Apart from the preset tiles, you can select the advanced settings under [Show all settings]. These
settings are used for extended copy jobs. The following table gives an overview and a short
description of the available settings on the printer. You can find a detailed description of each
setting in Océ Express WebTools.
NOTE
The values for the compression mode and organization change depending on the color mode
and file type you select. In some situation and for some file types you cannot set the
compression and organization settings. For more information on this, see
Preset category: [File]
Setting
[File type]
Settings values Settings values
Type [TIFF]
[PDF]
[PDF/A]
[JPEG]
[CALS]
[Compression] [Automatic]
[LZW]
[Flate]
[Packbits]
[JPEG]
[None]
[JPEG quality] [Maximum]
[High]
[Medium]
[Low]
[Organization] [Raw]
[Striped]
[Tiled]
Advanced settings for scan jobs
File type on page
Function
[The file type of the scanned image.
The list of file types depends on scan
to color, grayscale, or black-and-
white: CALS is only available when
scanning to black-and-white; JPEG is
not available when scanning to
black-and-white.]
The compression type when scan-
ning to TIFF or to PDF depends on
the chosen [File type].
[The image quality when scanning to
JPEG. With a lower quality, the com-
pression increases giving a smaller
file size.]
[The file organization when scanning
to TIFF.]
Chapter 4 - Use the Printing System
271.
263