Make A Scan And Remove A Strip - Canon Oce Colr Wave 500 Operation Manual

Make a scan and remove a strip

Introduction
If you have an original with a strip, you can remove the strip from your scanned file.
Use the option [Remove strip] on the user panel to scan an original with a strip and remove the
strip from the file. You can remove a strip from the top, the bottom, the left or the right side of the
original.
Procedure
1.
Feed the original face up and centered on the original feeding table.
2. Tap the scan tile on the user panel and select your preferred location in the scan Smart Access.
When you do not select a location the file is sent to the public Smart Inbox.
3.
Tap the scan tile again. A window with a list of presets opens.
4.
Tap [Show all settings]. A list with settings opens.
5.
Tap [Remove strip] under the [Original] preset.
The [Top] strip
6. Select [Top], [Bottom], [Left], or [Right] and define the values.
7. Make your settings and tap [OK].
8.
Tap the green button.
Result
The printer scans the original to file without the defined strip. The file is sent to your preferred
location. As default, you can find your file in the public Smart Inbox in Océ Express WebTools.
The [Bottom] strip
Make a scan and remove a strip
The [Left] strip
Chapter 4 - Use the Printing System
The [Right] strip
273