Set The Default Print Preset - Canon Oce Colr Wave 500 Operation Manual

Set the default print preset

Set the default print preset
Introduction
With a preset you can predefine the settings you need for a print job from USB or an external
location.
Print has four preset categories: [Media], [Layout], [Image], and [Finishing]. For each category you
can set one default preset in Océ Express WebTools. The default preset is automatically used
when you press the green button on the user panel.
NOTE
You can always find a short explanation of the setting in the tooltip.
Procedure
1.
Open the [Preferences] - [Print job defaults] tab.
2. Under [User panel configuration: Default presets for print] select the preset category you want to
change, for example [Default layout preset].
3. Select the setting you want to use as the default preset, for example [Standard half size].
Select [Custom] to make your custom preset default.
4.
Click [Ok] to confirm, or [Cancel] to reject your entries.
After you finish
To make sure your preset is active on the user panel, press the home button on the home screen
of the user panel.
124 Chapter 3 - Define your Workflow with Océ Express WebTools