Canon Oce Colr Wave 500 Operation Manual page 82

Set the print job default settings
Setting
[Media selection policy]
[Cut method]
[Custom print length]
[Add leading strip]
[Add trailing strip]
Overview of the [Print job defaults] - [Layout] settings
Open the [Preferences] - [Print job defaults] tab. Go to [Layout] and click Edit in the upper right-
hand corner.
Setting
[Scale]
[Mirror]
[Rotation]
[Alignment]
[Horizontal shift]
[Vertical shift]
82 Chapter 3 - Define your Workflow with Océ Express WebTools
Description
• Select [Automatic next larger] to allow the printer to use a me-
dia roll larger than the size of the print, when the exact size is
not available.
• Select [Automatic exact fit] to only allow the printer to use a
media roll that has the exact media size of the print. When the
media roll with the exact media size is not available a media re-
quest appears.
• Select [Standard] to cut the print at a standard media size (DIN,
ANSI etc.).
• Select [Synchro] to cut the print at the end of the image.
• Select [Custom] (numeric) to cut the print at a specific length.
Enter the cut length of your print job.
When you enter a value, the printer adds a blank strip of the speci-
fied length at the top of the output.
When you enter a value, the printer adds a blank strip of the speci-
fied length at the bottom of the output.
Description
• Select [Automatic scale to the media size] to scale the image to
the media.
• Select [Automatic scale down when image is larger than media]
to scale down the image one format smaller than the original.
• Select [Custom scale factor] to enter your own scale percent-
age, with 100 percent as no scaling.
Select [On] to mirror the image along the vertical axis - the media
transport direction.
Select any option to rotate the image counterclockwise.
When you want to print faster, select [Auto rotate landscape]. You
can print faster due to less media transport.
Select [Auto rotate media saving] to use the media in the most ef-
ficient way.
For more information, see
Select any of the options to define where to align the image on the
media.
For more information, see
Define how much you want the image to shift horizontally in the
chosen alignment position.
Define how much you want the image to shift vertically in the
chosen alignment position.
Set the rotation mode on page
Set the alignment mode on page
163.
164.