Canon Oce Colr Wave 500 Operation Manual page 25

4. Repeat action 1 till 3 on the right side cover.
5.
Move the printer to the preferred location. Be aware of the printer working area.
6.
Pull out the left foot [1] until it touches the ground and locks [2]. You should hear a click when it
locks into place.
2
NOTE
If you do not hear a click, place your foot on the foot of the printer [1] and at the same time push
gently against the printer until you hear the click.
7. Place the foot cover. Place the pin into the notch.
1
2
1
Chapter 2 - Get to Know the Printing System
Move the system
25