Configure The Media Profiles - Canon Oce Colr Wave 500 Operation Manual

Configure the media profiles

Introduction
In Océ Express WebTools you can configure the media profiles on the printer.
Procedure
1. Select the [Media] - [Media types] tab to get an overview of all the media profiles that are
available on your Océ ColorWave 500 printing system.
2.
Click the media type, to check the media information.
3.
Click the check box of a media type and click the [Enable] button to make the media profile
available on the user panel and in the print job submission applications. If you [Disable] a media
profile it will no longer be available on the user panel and in the print job submission
applications.
4. Click [Install] if you must install a new media profile.
NOTE
You must download the new media profile before you can install it to the Océ ColorWave 500
embedded controller. Contact your local representative for new media profiles.
5.
Click [Remove] to remove a media profile that is no longer needed.
NOTE
This action cannot be undone.
Chapter 3 - Define your Workflow with Océ Express WebTools
Configure the media profiles
195