Show Lldp Config - Edge-Core ECS3510-10PD Management Manual

E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#lldp notification
Console(config-if)#
This command shows LLDP configuration settings for all ports.

show lldp config

S
YNTAX
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show lldp config
LLDP Global Configuation
LLDP Port Configuration
.
.
.
Console#show lldp config detail ethernet 1/1
LLDP Port Configuration Detail
An SNMP agent should therefore periodically check the value of
lldpStatsRemTableLastChangeTime to detect any lldpRemTablesChange
notification-events missed due to throttling or transmission loss.
show lldp config [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10)
port-channel channel-id (Range: 1-5)
M
ODE
LLDP Enabled
LLDP Transmit Interval
LLDP Hold Time Multiplier
LLDP Delay Interval
LLDP Re-initialization Delay : 2 sec.
LLDP Notification Interval
LLDP MED Fast Start Count
Port Admin Status Notification Enabled
-------- ------------ --------------------
Eth 1/1 Tx-Rx True
Eth 1/2 Tx-Rx True
Eth 1/3 Tx-Rx True
Eth 1/4 Tx-Rx True
Eth 1/5 Tx-Rx True
Port
Admin Status
Notification Enabled
Basic TLVs Advertised
– 1321 –
C
HAPTER
: Yes
: 30 sec.
: 4
: 2 sec.
: 5 sec.
: 4
: Eth 1/1
: Tx-Rx
: True
: port-description
system-name
| LLDP Commands
39