Setting Up 802.11 Radio Communications - Intermec PB50 User Manual

Chapter 2 — Configuring the Mobile Printer

Setting Up 802.11 Radio Communications

30
To set up Bluetooth communications with a mobile computer
Follow the procedure to discover and connect to Bluetooth devices
•
in your mobile computer user's manual.
Note: For maximum security, you need to configure a Bluetooth
passcode for your mobile printer. The default passcode is "1234."
To set up Bluetooth communications with a scanner
1 Download and install EasySet.
2 Create the following bar code labels using EasySet:
• Administrator reset factory defaults
• Bluetooth parameters - security - not active
• Bluetooth parameters - connect/disconnect - compose BT
address
• Bluetooth parameters - security - compose PIN:
3 Scan the bar code labels with the Bluetooth scanner.
Icon Description
The Bluetooth radio is on and the printer is not connected to a
serial cable.
The Bluetooth radio is turned off. The Bluetooth radio turns off
when you connect a serial cable.
The printer can have an internal 802.11 b/g radio to transfer and
receive data using wireless communications. This manual assumes
that you have already set up your wireless communications network
including your access points. The following procedures include
information on setting up wireless security for both IPL and
Fingerprint versions of the printer.
PB50 and PB51 Mobile Printer User's Guide