Initial Setup At The Control Panel; Installation Wizard; Quick Setup Home; Configuration Report - Xerox ColorQube 9301 System Administrator Manual

Initial Setup at the Control Panel

Installation Wizard

The Installation wizard starts the first time you turn on the printer. The wizard prompts you with a series
of questions to help you configure basic printer settings.
Note: You can change these settings at any time.

Quick Setup Home

After the Installation wizard completes, the Quick Setup Home wizard appears. Use the Quick Setup
Home wizard to configure printer settings.
Note: You can complete the wizard at any time.
1. Use the IP Address Settings wizard to assign a static IP address or change the default dynamic
addressing settings.
2. Use the Contact Numbers wizard to type phone numbers for support or supplies.
After the Quick Setup Home wizard completes, the printer restarts and a Configuration Report
automatically prints.

Configuration Report

The Configuration Report lists all current settings of the printer. A configuration report prints at startup by
default.
In CentreWare Internet Services, click Status > Configuration Report.
1.
2. To print the report, click Print Configuration Page.
To turn off automatic printing of a Configuration Report at startup, see
Report at Startup on page 16.
Note: If the system administrator has restricted printing of the Configuration Report, you need a user
name and password to print. For details, see the system administrator.
System Administrator Access at the Control Panel
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Press the Log In/Out button.
3. Type admin and touch Next.
Type the Admin Password and touch Enter. The default password is 1111.
4.
Disabling the Configuration
ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Initial Setup
15