Table of Contents
Advertisement
6.7.8. Identify Enclosure
To prevent removing the wrong enclosure, the selected Sans Digital expander enclosure all disks fault
LED indicator will light for physically locating the selected enclosure when the "Identify Enclosure" is
selected. This function will also light up the enclosure LED indicator, if it is existed.
6.7.9. Identify Drive
To prevent removing the wrong drive, the selected disk fault LED indicator will light for physically
locating the selected disk when the "Identify Selected Device" is selected.
6.8. System Controls
6.8.1. System Config
To set the RAID system function, move the cursor to the main menu and click on the "System Controls"
link. The "Raid System Function" menu will show all items, and then select the desired function.
System Beeper Setting
•
The "System Beeper Setting" function is used to "Disabled" or "Enabled" the SAS RAID controller
alarm tone generator.
85
Advertisement
Table of Contents
