Table of Contents
Advertisement
3.7.7.4.
Time To Spin Down Idle Hdd
This function can automatically spin down the drive if it hasn't been accessed for a certain
amount of time. This value is used by the drive to determine how long to wait (with no disk
activity, before turning off the spindle motor to save power). The values can be selected
"Disabled" or within the range 1 to 60 minutes.
3.7.8. Ethernet Configuration
Use this feature to set the controller Ethernet port configuration. It is not necessary to create reserved
disk space on any hard disk for the Ethernet port and HTTP service to function; these functions are built
into the controller firmware. Move the cursor bar to the main menu "Ethernet Configuration Function"
item and then press the Enter key. The "Ethernet Configuration" menu appears on the screen. Move the
cursor bar to an item, and then press Enter key to select the desired function.
3.7.8.1.
DHCP Function
DHCP (Dynamic Host Configuration Protocol) allows network administrators centrally manage
and automate the assignment of IP (Internet Protocol) addresses on a computer network. When
using the TCP/IP protocol (Internet protocol), it is necessary for a computer to have a unique IP
address in order to communicate to other computer systems. Without DHCP, the IP address
49
Advertisement
Table of Contents
