Table of Contents
Advertisement
3.7.5. Raid System Function
To set the "Raid System Function", move the cursor bar to the main menu and select the "Raid System
Function" item and then press Enter key. The "Raid System Function" menu will show multiple items.
Move the cursor bar to an item, and then press Enter key to select the desired function.
3.7.5.1.
Mute The Alert Beeper
The "Mute The Alert Beeper" function item is used to control the SAS RAID controller beeper.
Select Yes and press the Enter key in the dialog box to turn the beeper off temporarily. The
beeper will still activate on the next event.
3.7.5.2.
Alert Beeper Setting
The "Alert Beeper Setting" function item is used to "Disabled" or "Enabled" the SAS RAID
controller alarm tone generator. Select "Disabled" and press the Enter key in the dialog box to
turn the beeper off.
3.7.5.3.
Change Password
The default password is set to 0000. The password option allows user to set or clear the
password protection feature. Once the password has been set, the user can monitor and
40
Advertisement
Table of Contents
