Table of Contents
Advertisement
Raid Level
•
Set the "Raid Level" for the volume set. Highlight "RAID Level" and press the Enter key. The
available RAID levels for the current volume set are displayed. Select a RAID level and press the
Enter key to confirm.
Capacity
•
The maximum available volume size is the default value for the first setting. Enter the
appropriate volume size to fit your application. The capacity value can be increased or
decreased by the UP and DOWN arrow keys. The capacity of each volume set must be less than
or equal to the total capacity of the RAID set on which it resides.
If volume capacity will exceed 2TB, controller will show the "Greater Two TB Volume Support"
sub-menu.
30
Advertisement
Table of Contents
