Table of Contents
Advertisement
"System Controls" link. The "System Controls" menu will show available items. Select the "SNMP
Configuration" item. The following "SNMP System Configuration" screen is launched by
browser-based manager.
About community, Community name acts as a password to screen accesses to the SNMP agent of a
particular network device. Type in the community names of the SNMP agent. Before access is
granted to a request station, this station must incorporate a valid community name into its request;
otherwise, the SNMP agent will deny access to the system. Most network devices use "public" as
default of their community names. This value is case-sensitive.
2. Mark the check box on the 'SNMP Through PCI Inband" setting and keep space (or zero) on all
"SNMP Tarp IP Address" options.
3. Installing the SNMP extension agent on the server. Please refer to next section of SNMP Extension
Agent Installation for different operation system such as Windows, Linux and FreeBSD.
D-3-4 SNMP Extension Agent Installation
The SNMP extension agent on the device is able to return meaningful, highly useful information to the
SNMP manager. The Sans Digital RAID controllers have supported the extension agent for Windows,
Linux and FreeBSD. This section is the detail procedures for those extension agent installations.
D-3-4-1 Windows
You must have administrative level permission to install SAS RAID controller extension agent
software. This procedure assumes that the RAID hardware and Windows are both installed and
operational in your system. To enable the SNMP agent for Windows, configure Windows for
TCP/IP and SNMP services. The SNMP extension agent file is ARCSNMP.DLL.
Screen captures in this section are taken from a Windows XP installation. If you are running
another version of Windows, your screens may look different, but the SNMP extension agent
installation is essentially the same.
1. Insert the RAID controller software CD in the CD-ROM drive.
2. Double-click on the setup.exe file that resides at: <CD-ROM>\packages\windows\SNMP
3. The screen shows Preparing to Install.
on the CD. (If SNMP service was not installed, please install SNMP service first.)
110
Advertisement
Table of Contents
