Table of Contents
Advertisement
If you're not sure which format to use, choose Mac OS X Extended (Journaled).
1. When a message asks you to confirm you want to partition the disk, click on the "Partition"
2. When the partitioning is complete, icons for each new partition show up on your desktop. They
5. ArcHTTP Proxy Server Installation
After hardware installation, the SAS/SATA disk drives connected to the SAS RAID controller must be configured and the
volume set units initialized before they are ready to use.
The user interface for these tasks can be accessed through the built-in configuration that resides in the controller's
firmware. It provides complete control and management of the controller and disk arrays, eliminating the need for
additional hardware or software.
In addition, a software utility to configure the SAS RAID controller is provided on the software CD delivered with SAS
RAID controller. This software CD contains the software utility that can monitor, test, and support the SAS RAID
controller. The software utility and McRAID storage manager can configure and monitor the SAS RAID controller via
ArcHTTP proxy server interface. The following table outlines their functions:
button. This may take a couple of minutes, depending on the size of the drives in your RAID
storage.
are now ready to use.
Configuration Utility
Operating System Supported
60
Advertisement
Table of Contents
