Table of Contents
Advertisement
To display drive information, move the mouse cursor to the desired physical drive number, then click on it.
•
The drive information will be displayed.
6.3. Main Menu
The main menu shows all available functions, accessible by clicking on the appropriate link.
6.4. Quick Function
The Quick Create option configures the arrays with just a few steps. Although drives of different sizes may be used
in the array, Quick Create will only operate upon drives of the same physical size.The number of physical drives in
the SAS RAID controller determines the Raid Levels that can be implemented with the RAID set. You can create a
RAID set associated with exactly one volume set. The user can change the Raid Level, Capacity, Initialization Mode,
and Stripe Size. A hot spare option is also created, depending on the existing configuration. Click on the "Confirm
The Operation" check box and click on the "Submit" button in the "Quick Create" screen, the RAID set and volume
set will start to initialize.
Note: In "Quick Create", your volume set is automatically configured based on the number of disks in your system.
Use the "RAID Set Functions" and "Volume Set Functions" if you prefer to customize your volume set, or RAID
30/50/60 volume set.
Individual
Category
Quick
Function
Raid
Set
Functions
Volume Set
Functions
Physical
Drives
System
Controls
Information
Description
Create a default configuration,
which is based on the number
of physical disks installed; it
can modify the volume set
Capacity,
Raid
Stripe Size.
Create a customized RAID set.
Create customized volume sets
and modify the existed volume
sets parameter.
Create pass through disks and
modify
the
existing
through
drives
Also provides the function to
identify disk drives (blinking
fault LED).
Setting
the
RAID
configuration.
Viewing
the
information.
The
Hierarchy
can
through
the
Hierarchy" item.
70
Level,
and
pass
parameters.
system
controller
Raid
Set
be
viewed
"Raid
Set
Advertisement
Table of Contents
